Wall Key Organizer
منظم مفاتيح جداري
A modest entry organiser with labelled hooks.
| Difficulty | Beginner |
|---|---|
| Material | PLA |
| Printer | FDM |
| Filament | 90 g |
| Print time | 3 h |
| Build time | 1 h 15 min |
Print settings
- 0.2 mm layer height
- 3 perimeters
- 15% infill
Extra parts
- Optional M3 screws
Tools
- Flush cutters
- Fine file
Steps
- Print a small fit test
- Check interfaces
- Assemble after cooling