Signal One Enclosure
هيكل سيغنال ون
A serviceable ESP32 enclosure with deliberate cable routing and ventilated electronics bays.
| Difficulty | Intermediate |
|---|---|
| Material | PETG |
| Printer | FDM |
| Filament | 126 g |
| Print time | 5 h 10 min |
| Build time | 2 h 25 min |
Print settings
- 0.2 mm layer height
- 4 perimeters
- Tree supports for ports
Extra parts
- ESP32 board
- M3 heat-set inserts
- M3 screws
Tools
- Soldering iron
- Hex driver
Steps
- Insert nuts while warm
- Route cables before closing
- Test ventilation