A pre-print checklist for fewer 3D printing failures

By Let's 3D Studio · 1 min read

Before starting a print, confirm the model fits the build volume, has the expected orientation, and uses the intended profile. Check the first-layer footprint, support plan, seam placement, estimated material use, and whether the print needs supervision at a specific point.

At the machine, confirm the right filament is loaded and reasonably dry, the build surface is prepared according to its guidance, and there is enough clearance around moving components. Check that the spool can unwind without snagging for the entire expected run.

After the first layer begins, stay long enough to inspect adhesion and extrusion. Catching a problem early protects the machine, the material, and the time you planned for the project.